Regular price£32.50
  • Free UK shipping over £49
  • Free worldwide shipping over £149

An all in one aluminium storage and tool solution designed for Dynavap users.

    • Two airtight containers
    • Built-in Decapper and Cooling Magnet
    • Adjustable CCD inserter
  • AVB container with removable multipurpose Debowler
  • Tamper
  • Coloured o-rings for personalisation
    (2x Black, 2x Green, 1x Brown)

Please note: All Reload containers have marks on the inside from the finishing process, it won't affect the performance.

Please also refer to the product page for user instructions.

Tips for getting the best out of your Reload:

  • The CCD tool only works with Tips that have the Adjust-a-Bowl feature. The CCD can be set anywhere between the half and full bowl position by adjusting the height of the tool. Screw it out until you reach the desired setting - you can count the turns with the marking on the tool.
  • The fully screwed in CCD tool position should set your Tip to the half bowl setting, but due to variations between the Tips you may have to adjust it a little higher.
  • The CCD has to sit in the Tip in a convex shape (see the picture below) for the best fit. Depending on the Tip and the CCD material you may need to pre-shape your CCD before inserting. To do so first flatten it out and place it on top of the CCD tool. Press down on the middle of the CCD to make it concave - you can use the De-Bowler tool. Make sure that the CCD is still in the same shape or flat after inserting.
    CCD Shape in Tip
    • To flatten the CCD you can roll your Reload back-and-forth over it. Alternatively use the CCD tool - place the bent CCD onto the tool, press it in on the middle to make it concave, then flip it upside down and repeat the process.
    • You don’t have to always fill your bowls to the brim, if you want to vape a bit less without adjusting the CCD height just pack in the desired amount and tamp it down with the Tamper tool.
    • Tamping down the material can result in a more even roast and denser vapour production, but don’t pack it too hard as it can choke the airflow.
    • When using the De-Capper make sure you wait and cool down the Cap on the magnet until you can hear it click before removing it. If you miss to do so some fallen out ABV pieces in the Cap can go flying when it clicks out.



    1. Select your height
    Can be set anywhere between the half-
    and full-bowl settings on all Adjust-a-Bowl tips!

    2. Place, Shape and Press
    Place the CCD onto the adjustable dock and fine tune or straighten if needed by pressing into the concave with the De-Bowler Tool.

    3. Click and Go
    Insert the Tip fully until you feel a noticeable click indicating the screen is in place. Check the result and you are all set!

    <h1 id=">
    Powerful Magnet & De-Capper

    One of the strongest mags in the game for effective cap removal. For captive caps, slide into the grips and give it a firm pull. Reduces contact with hot caps giving you simple, speedy and safe removal.

    Multifunctional De-Bowler Tool

    Our removable De-Bowler tool can be used as a pokey and is also useful for reshaping those bent CCDs. Don’t want keep your AVB? Simply fill with ground botanical for extra storage.


    Want those THICK clouds? Give your botanicals a good tamping and you’ll be amazed with the results - more consistent roast and better vapour production, even when using half bowl.

    The Ultimate Travel Buddy *

    The optional stainless steel crown makes the Reload your perfect on-the-go companion. Just remove the crown from the magnetic lid, de-cap, de-bowl and reload quicker than ever!

    * (additional Crown is sold separately)

    Different configurations available


    Normal Pot, Multifunctional Lid

    33mm x 40mm - 35g
    1.3in x 1.6in - 1.2oz


    Normal Pot, De-Bowler Pot, Multifunctional Lid

    33mm x 73mm - 57g
    1.3in x 2.9in - 2.0oz

    Large *

    Normal Pot, Mini Pot,
    De-Bowler Pot, Multifunctional Lid

    * (additional Mini Pot is sold separately)

    33mm x 94mm - 73g
    1.3in x 3.7in - 2.6oz